fbpx
, , ,

PRO-JECT T1 EVO PHONO WALNUT TURNTABLE

SKU: 9120129864787
Availability:

Only 1 left in stock


449,00

Only 1 left in stock

Product Information
Model: 9120129864787 | UPC: 9120129864787
The T1 EVO aims to deliver true high-fidelity sonics for vinyl enthusiasts on a limited budget. Boasting premium materials, stylish aesthetics and rich, lively sound quality, Pro-Ject’s extensive development process has ensured no compromise to sonics in the design & build of T1 EVO. The stylish CNC-machined plinth uses no plastic and is carefully manufactured to eliminate resonant hollow spaces that would otherwise detract from sound quality. ‘Sound-first’ principles are implemented throughout. The glass platter is heavy and non-resonant, again avoiding the flaws of plastic and cheap steel alternatives. Additionally, the purpose-selected turntable feet are highly effective in isolating the T1 EVO from ambient vibrations in the vicinity of your hi-fi system.

Features
Built-In Phono Pre-Amp
Electronic Speed Change
Pre-adjusted Ortofon OM10 Cartridge Included
Anti-Resonant Sub-Platter Design
Heavy 8mm-Thick Low-Resonance Glass Platter
8.6″ One-Piece Aluminum Tonearm
Low Friction, Vibration Free Tonearm Bearing
Low-Capacitance Connect it Phono E RCA Cables
Vibration Absorbing Isolation Feet
Dust Cover with Adjustable Hinges Included
Drive System
T1 EVO’s motor drives a belt attached to a larger sub-platter (Debut-sized!) which rotates in a bearing assembly machined to tolerances within 0.001mm. It’s comprised of a stainless-steel spindle in brass bushing. All told, the T1 EVO drive system ensures stable & accurate platter speeds with non-resonant behavior, allowing the tonearm & cartridge to perform their very best.

One-Piece Aluminum Tonearm
The tonearm is an 8.6″ one-piece aluminum design, meaning the headshell and armtube are integrated for the sake of rigidity & resonance control. High-quality bearings allow for silent & frictionless motion of the tone arm.

Ortofon OM 10 Moving Magnet Cartridge
Supplied with an Ortofon OM 10 moving magnet cartridge featuring an elliptical diamond stylus tip, this is a true hi-fi playback system with no corners cut! The cartridge is aligned, tracking force is set at the factory and anti-skating is built-in, sparing you the trickiest parts of turntable setup so that you can be spinning vinyl in mere minutes.

Low-Capacitance Phono Cables
The T1 EVO outputs through Pro-Ject’s shielded, semi-symmetrical & low-capacitance phono cables. These are purpose-designed by Pro-Ject to carry the phono signal (not the typical off-the shelf RCA cables usually found in this price range). There is also a dust cover for your convenience& as well as a felt mat & 45rpm adapter.

Made in Europe
Still made in Europe by a factory with decades of experience, T1 EVO is a true hi-fi turntable that looks and sounds sublime.
Specifications
Speed: 33 & 45rpm (electronic speed change)
Principle: Belt driven sub-platter
Speed variance: 0.7% (33rpm), 0.6% (45rpm)
Wow & Flutter: 0.25% (33rpm), 0.23% (45rpm)
Platter: Heavy 8mm-thick blasted-glass platter
Main bearing: Stainless steel axle in brass bushing
Signal to noise: 65dB
Tonearm: 8.6” one-piece aluminum
Effective arm length: 218.5mm
Overhang: 22.0mm
Effective tonearm mass: 8.0g
Counterweight for mass: 5-10g (pre-adjusted)
Tracking force range: 0-5g (set at 1.75g)
Power supply: 110-240V 50-60Hz 15V DC (800mA)
Power consumption: 4.5W max
Dimensions (W x H x D): 16.34” x 3.94” x 13.19″
Weight: 8.38 lbs.

What’s In The Box
T1 Evo Phono Turntable with Built-In Preamp & Ortofon OM 10 MM Cartridge
Dust Cover
Felt Mat
Power Cord
RCA Cable
Manual

SKU: 9120129864787 Categories: , , ,

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “PRO-JECT T1 EVO PHONO WALNUT TURNTABLE”

There are no reviews yet.

You may also like…